Can u give me process model for the task of painting the walls in a romm ?

You first need to clear the room, remove all items from the walls, and all nails or tacks that might be in the walls. Next you need to wipe down the walls with a damp cloth and repair any damage that is done to the walls. Once that's completed you need to tape the walls with painters tape around the base boards and ceiling. If you're painting over a dark color paint with a lighter color, you may to need to prime the wall first with a base coat. Once the primer or base coat dries, then go back and pait the walls with your paint color. Allow the paint to completely dry before removing any painters tape!Can u give me process model for the task of painting the walls in a romm ?
Benedict is absolutely right! When painting, load up your roller with paint and roll on the grid of your paint tray, so you don't have too much paint. Work from top to bottom in sections (imagine your walls in a grid pattern 3 across/2 down) Start top left (or right, whatever works for you) corner, paint a big W (down, up, down) then go side to side to cover your W and then paint a big M (up,down, up) This method gives you the best coverage - when you buy your roller sleeve, instructions are actually on the label, then you will see what i mean.Can u give me process model for the task of painting the walls in a romm ?
process model? if you are going to make this simple project into a major operation, just hire somebody to do it. you are making a big deal out of a simple task.
U must cut-in the wall to ceiling edge. If painting ceiling always use a CEILING paint. It splatters less. Always use quality rollers,brushes etc. Do NOT leave painters tape on till dry, Remove after a brief time otherwise u may pull paint away from surface.Make sure u have room to work,put down canvas tarps,they are best.